View 2SK3062_278948.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
2SK3062
SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE
ORDERING INFORMATION
PART NUMBER 2SK3062 2SK3062-S 2SK3062-ZJ PACKAGE TO-220AB TO-262 TO-263
DESCRIPTION
This product is N-Channel MOS Field Effect Transistor designed for high current switching applications.
FEATURES
* Low on-state resistance RDS(on)1 = 8.5 m MAX. (VGS = 10 V, ID = 35 A) RDS(on)2 = 12 m MAX. (VGS = 4.0 V, ID = 35 A) * Low Ciss: Ciss = 5200 pF TYP. * Built-in gate protection diode
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) Drain Current (Pulse)
Note1
VDSS VGSS(AC) VGSS(DC) ID(DC) ID(pulse) PT PT Tch Tstg
60 20 +20, -10 70 280 100 1.5 150 -55 to +150 35 122.5
V V V A A W W C C A mJ
Total Power Dissipation (TC = 25C) Total Power Dissipation (TA = 25C) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy
Note2 Note2
IAS EAS
Notes 1. PW 10 s, Duty cycle 1 % 2. Starting Tch = 25 C, RG = 25 , VGS = 20 V 0 V
THERMAL RESISTANCE
Channel to Case Channel to Ambient Rth(ch-C) Rth(ch-A) 1.25 83.3 C/W C/W
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D13101EJ1V0DS00 (1st edition) Date Published April 1999 NS CP(K) Printed in Japan
(c)
1998,1999
2SK3062
ELECTRICAL CHARACTERISTICS (TA = 25 C)
CHARACTERISTICS Drain to Source On-state Resistance SYMBOL RDS(on)1 RDS(on)2 Gate to Source Cut-off Voltage Forward Transfer Admittance Drain Leakage Current Gate to Source Leakage Current Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS(off) | yfs | IDSS IGSS Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr TEST CONDITIONS VGS = 10 V, ID = 35 A VGS = 4.0 V, ID = 35 A VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 35 A VDS = 60 V, VGS = 0 V VGS = 20 V, VDS = 0 V VDS = 10 V VGS = 0 V f = 1 MHz ID = 35 A VGS(on) = 10 V VDD = 30 V RG = 10 ID = 70 A VDD = 48 V VGS(on) = 10 V IF = 70 A, VGS = 0 V IF = 70 A, VGS = 0 V di/dt = 100 A / s 5200 1300 480 75 1150 360 480 95 13 30 0.97 70 140 1.0 20 MIN. TYP. 6.3 8.2 1.5 87 10 10 MAX. 8.5 12 2.0 UNIT m m V S
A A
pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T. RG = 25 PG. VGS = 20 0 V 50
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
L VDD PG. RG RG = 10
VGS RL VDD ID
90 % 90 % ID
VGS
Wave Form
0
10 %
VGS(on)
90 %
BVDSS IAS ID VDD VDS
VGS 0 = 1 s Duty Cycle 1 %
ID
Wave Form
0
10 % td(on) ton tr td(off) toff
10 % tf
Starting Tch
TEST CIRCUIT 3 GATE CHARGE
D.U.T. IG = 2 mA PG. 50
RL VDD
2
Data Sheet D13101EJ1V0DS00
2SK3062
TYPICAL CHARACTERISTICS (TA = 25 C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA
TOTAL POWER DISSIPATION vs. CASE TEMPERATURE 140
dT - Percentage of Rated Power - %
PT - Total Power Dissipation - W
25 50 75 100 125 150 175 200
100 80 60 40 20
120 100 80 60 40 20 0 25 50 75 100 125 150 175 200
0
TC - Case Temperature - C
TC - Case Temperature - C
FORWARD BIAS SAFE OPERATING AREA 1000
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE Pulsed
ID - Drain Current - A
ID - Drain Current - A
100
RD
S( ) on
Lim
ite
1 S= VG (@ ID(DC)=70 A d
) 0V
ID(pulse)=280 A
PW 10
=1 s
0
s
1m Di 10
0
200
VGS = 10 V VGS = 4.0 V
s
DC
ss
10
10 m 0m s ipa s tio n Lim ite d
100
TC = 25C Single Pulse 1 0.1
1
10
100
0
1
2
3
4
VDS - Drain to Source Voltage - V
VDS - Drain to Source Voltage - V
FORWARD TRANSFER CHARACTERISTICS 100 TA = 125C 75C 25C -25C
ID - Drain Current - A
10
1
0.1 Pulsed VDS = 10 V 4 5
0
1
2
3
VGS - Gate to Source Voltage - V
Data Sheet D13101EJ1V0DS00
3
2SK3062
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1000
rth(t) - Transient Thermal Resistance - C/W
100
Rth(ch-A)= 83.3 C/W
10 Rth(ch-C)= 1.25 C/W 1
0.1
0.01 0.001 10 TC = 25C Single Pulse 100 1m 10 m 100 m 1 10 100 1000
PW - Pulse Width - s
100
Tch = -25C 25C 75C 125C
RDS(on) - Drain to Source On-state Resistance - m
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
| yfs | - Forward Transfer Admittance - S
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 30 Pulsed
20
10
10 ID = 35 A
1 VDS = 10 V Pulsed 100
0.1
1.0
10
0
5
10
15
ID - Drain Current - A
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 30 Pulsed
GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VGS(off) - Gate to Source Cut-off Voltage - V
2.0
VDS = 10 V ID = 1 mA
20
1.5
1.0
10
VGS = 4.0 V 10 V
0.5
0 0.1
0
1
10
100
-50
0
50
100
150
ID - Drain Current - A
Tch - Channel Temperature - C
4
Data Sheet D13101EJ1V0DS00
2SK3062
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 20 VGS = 4.0 V 15 10 V 10 100
SOURCE TO DRAIN DIODE FORWARD VOLTAGE
ISD - Diode Forward Current - A
VGS = 4.0 V 0V
10
1
5 ID = 35 A -50 0 50 100 150
0.1 Pulsed 0 0.5 1 1.5 VSD - Source to Drain Voltage - V
0
Tch - Channel Temperature - C
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 100
SWITCHING CHARACTERISTICS
Ciss, Coss, Crss - Capacitance - nF
td(on), tr, td(off), tf - Switching Time - ns
VGS = 0 V f = 1 MHz
10000
VDS = 30 V VGS = 10 V RG = 10
tr 1000 td(off) 100 td(on) tf
10 Ciss
1
Coss Crss
10 0.1 1 10 100
0.1 0.1
1
10
100
VDS - Drain to Source Voltage - V
ID - Drain Current - A
REVERSE RECOVERY TIME vs. DRAIN CURRENT 1000
VDS - Drain to Source Voltage - V
60 VDD = 12 V 30 V 48 V
12 10 8 6
100
40
10
20
4 2
1 0.1
1
10
100
0
25
50
75
100
0
IF - Drain Current - A
QG - Gate Charge - nC
Data Sheet D13101EJ1V0DS00
VGS - Gate to Source Voltage - V
trr - Reverse Recovery Time - ns
di/dt = 100 A /s VGS = 0 V
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 80 16 ID = 70 A 14
5
2SK3062
SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD 100 160 IAS = 35 A 140
SINGLE AVALANCHE ENERGY DERATING FACTOR
VDD = 30 V RG = 25 VGS = 20 V 0 V IAS 35 A
IAS - Single Avalanche Current - A
EAS
10
Energy Derating Factor - %
10 m
=1
22.
120 100 80 60 40 20
5m
J
1.0 RG = 25 VDD = 30 V VGS = 20 V 0 V Starting Tch = 25 C 0.1 10 100
1m
0 25
50
75
100
125
150
L - Inductive Load - H
Starting Tch - Starting Channel Temperature - C
6
Data Sheet D13101EJ1V0DS00
2SK3062
PACKAGE DRAWINGS (Unit : mm) 1)TO-220AB (MP-25)
3.00.3 10.6 MAX. 10.0 5.9 MIN. 15.5 MAX. 4.8 MAX.
2)TO-262 (MP-25 Fin Cut)
1.00.5
3.60.2
4.8 MAX. 1.30.2
1.30.2
(10) 4
1
2
3
4 123 6.0 MAX.
1.30.2
1.30.2
12.7 MIN.
12.7 MIN.
8.50.2
0.750.3 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
0.750.1 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
3)TO-263 (MP-25ZJ)
(10) 4 1.00.5 8.50.2 4.8 MAX. 1.30.2
EQUIVALENT CIRCUIT
Drain
5.70.4
1.40.2 0.70.2 2.54 TYP. 1 2
(0
) .5R
3 2.54 TYP.
(0
.8R
)
0.50.2
Gate
Body Diode
Remark
The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
2.80.2
1.Gate 2.Drain 3.Source 4.Fin (Drain)
Gate Protection Diode
Source
Data Sheet D13101EJ1V0DS00
7
2SK3062
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of 2SK3062

	To Download 2SK3062 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .